How to Create Real-Time Digital Manual With Your SOLIDWORKS Files

   By TriMech Marketing on January 18, 2018

With the snow coming down we thought it would be the perfect time to show off SOLIDWORKS Composer and how it can be used to create an interactive animation assembly. In the on-demand webinar below, I demonstrate this by using the software to assemble a 3D printed snowflake from four unique components. 

Before you dive into creating the digital click-through manual, it’s important to know the set up of the program. SOLIDWORKS Composer has three main symbols/sections you should know before starting. 

1) Back & Forward Arrow

On the left side of the screen you will see two green arrows. These will help you toggle through the different steps of your assembly, from the very beginning to the completed version. This allows you to quickly move through the steps as well as re-watch any that you may need to see more than once. 

2) Red Arrow

Right below the green arrows, you will see a red arrow, which will also appear on the instructions. The red arrow shows you the grasp location. These are very important symbols to pay attention to because they dictate where to grab and hold a piece during the assembly, which will help ensure that everything is being put together in the correct way. 

3) White Circles

On the right side of the instructions you can find white circles with different components inside them. These are the parts used to assemble the puzzle.

Interested in getting more tips and tricks? Check out our other on-demand webinars!

Related Products
SOLIDWORKS Software

Browse the TriMech web store for SOLIDWORKS software to design, analyze and manufacture your products on your desktop.

TriMech

TriMech provides thousands of engineering teams with 3D design and rapid prototyping solutions that work hand-in-hand, from sketch to manufacturing. InterPro became a part of TriMech Solutions LLC in 2021.

Related Content

Graco Hand Tool

Graco: Nylon 3D Printed Pressure Check Hand Tool

Graco Inc. supplies technology and expertise for the management of fluids and coatings in both…

Learn More...
P3 & CLIP

What are the differences between P3 and CLIP 3D printing technology?

P3 vs CLIP As 3D printing continues to evolve and revolutionize the manufacturing space, the…

Learn More...

Creating Lofts in SOLIDWORKS

Part modeling in SOLIDWORKS can go far beyond what our imagination is able to create….

Learn More...